PLEASE CALL ME BACK! USE OUR CONTACT FORM!

Pollutants

Many industrial processes generate flue gases containing pollutants that can adversely impact people and the environment. We offer cost-effective solutions for their capture and neutralization.

SO2 - SULFUR DIOXIDE

Sulfur dioxide is an acid gas, also called sulfur oxide or sulfurous anhydride. It is non-flammable and non-explosive. With a pungent odor, this pollutant is toxic and a respiratory irritant. In plants burning sulfur-containing fuel, SO2 can, for example, be removed from the flue gas through dry sorbent injection, where SO2 reacts with hydrated lime (Ca(OH)2) to form calcium sulfite (1) or calcium sulfate (2):

  1. Ca(OH)2 + SO2 → CaSO3 + H2O
  2. Ca(OH)2 + SO2 + ½ O2 → CaSO4 + H2O

WHERE IT COMES FROM

SO2 is released by combustion of coal and heavy oil in power stations, as well as within the processes of municipal solid waste incinerators (MSWI), biomass plants, glass, brick, cement production, metal smelting among other types of industries.

PROPERTIES

Molecular formula

SO2

Molar mass

64.066 g/mol

Appearance

colorless gas

Odor

Pungent

Acidity

1.71 pKa

Hazards

Toxic

Boiling point

-10 °C     

LHOIST SOLUTIONS

Calcium compounds – in the form of limestone (CaCO3), quicklime (CaO) or hydrated lime (Ca(OH)2) – continue to be the dominant sorbents to control SO2 emissions. The choice of calcium sorbent depends on the type of capture process used. Tradeoffs on capital cost vs. operational cost for the various processes must be considered.

HCl - HYDROGEN CHLORIDE

Hydrogen chloride is a colorless and odorless acid gas, also called hydrochloride or hydrochloric acid.

Non-flammable and thermally stable, HCl is toxic and corrosive. HCl is very soluble in water. Dissolution generates large amounts of heat.

Hydrogen chloride can be captured efficiently with calcium hydroxide (Ca(OH)2) sorbents.  Optimum capture performance depends on the flue gas composition, flue gas treatment system and process temperature. The reaction mechanism is complex and takes place via the formation of calcium hydroxide-chloride (CaClOH) according to:

Ca(OH)2 + HCl → CaClOH + H2O
CaClOH + HCl → CaCl2 + H2O

WHERE IT COMES FROM

HCl comes from the combustion of PVC waste and chlorine-containing coal. It is also possible to find chlorine in the form of inorganic salts (NaCl) in wood, paper and cardboard or in food and biomass waste containing salt.

PROPERTIES

Molecular formula

HCl

Molar mass

36.46 g/mol

Appearance

colorless gas

Odor

pungent

Acidity

-6.3 pKa

Hazards

corrosive, toxic

Boiling point

-86 °C       

LHOIST SOLUTIONS

Hydrated lime has been used for many years in various dry sorbent injection processes. Industrial results have proven that Sorbacal® SP is capable of HCl capture above 98%, suitable for meeting regulatory requirements in the most challenging applications. Notably, in municipal and medical waste incinerators, HCl capture of more than 99% is reached. The appropriate solution can be tailored to meet the needs of any flue gas treatment installation.

HF - HYDROGEN FLUORIDE

Hydrogen fluoride is a non-flammable and non-explosive gas, also called fluoric acid, hydrofluoride, hydrofluoric acid or fluorine monohydride. It has a pungent odor and is corrosive, irritating and toxic. Hydrogen fluoride in flue gas readily reacts with hydrated lime:

Ca(OH)2 + 2HF → CaF2 + 2H2O

WHERE IT COMES FROM

Hydrogen fluoride comes from the presence of fluoride in raw materials or combustibles. HF emissions can be generated from the combustion of coal, fluorinated polymers or textiles, and by the decomposition of CaF2 and raw materials such as brick or glass. HF is also present in such waste as inert material, aluminum cans and synthetic fabrics.

PROPERTIES

Molecular formula

HF

Molar mass

20.01 g/mol

Appearance

colorless gas or colorless liquid (below 19.5°C)

Odor

sharp, pungent, irritating

Acidity

3.17 pKa

Hazards

corrosive, toxic

Boiling point

20 °C     

LHOIST SOLUTIONS

Sorbacal® SP and in particular Sorbacal® SPS are both sorbents capable of capturing over 99% of HF emissions using dry and semi-wet processes. All our calcium-based sorbents can capture HF depending on your requirements and your specific operation conditions. Today, a number of glass manufacturers worldwide use our sorbents for this particular high removal performance.

SO3 - SULFUR TRIOXIDE

This compound is also called sulfuric anhydride or sulfur trioxide. SO3 is a clear, oily liquid, often present as a gas. It should be handled with extreme care as it reacts with water violently to produce highly corrosive sulfuric acid. SO3 reacts with hydrated lime to form calcium sulfate:

Ca(OH)2 + SO3 → CaSO4 + H2O

WHERE IT COMES FROM

This pollutant is principally generated in power plants; glass, brick and non-ferrous metal manufacturing; municipal and industrial waste incineration; and boilers fired with heavy fuel oil. In addition, SO3 concentrations can increase when selective catalytic reduction is used for NOx control, as this typically catalyzes oxidation of SO2 to SO3.

PROPERTIES

Molecular formula

SO3

Molar mass

80.066 g/mol

Appearance

colorless liquid (room temperature)

Odor

sharp, irritating

Acidity

< -10 pKa

Hazards

oxidizing agent

Boiling point

45 °C

LHOIST SOLUTIONS

Dry calcium hydroxide products are typically used for SO3 capture and address both visible plume and operational concerns associated with this pollutant.
Sorbacal® H is normally capable of keeping SO3 below the usual target of 5 ppm. However, to achieve lower than 2 ppm levels of SO3, enhanced hydrated lime products such as Sorbacal® SP are needed.

SeO2 - SELENIUM DIOXIDE

Selenium dioxide, also called selenium oxide, is an acid gas. It is non-flammable and non-explosive. With an odor of rotten radish, this pollutant is toxic and a respiratory irritant. In plants burning selenium-containing fuel, SeO2 can be removed from the flue gas through dry sorbent injection, where SeO2 reacts with hydrated lime (Ca(OH)2) to form calcium selenite (1) or calcium selenate (2):

  1. Ca(OH)2 + SeO2 → CaSeO3 + H2O
  2. Ca(OH)2 + SeO2 + ½ O2 → CaSeO4 + H2O

WHERE IT COMES FROM

Selenium is used as an additive in glass making and is released as SeO2 during the manufacturing process. SeO2 is released by coal combustion in industrial processes, such as in power plants.

PROPERTIES

Molecular formula

SeO2

Molar mass

110.96 g/mol

Appearance

yellow-green

Odor

pungent

Hazards

corrosive, toxic

Boiling point

315 °C    

LHOIST SOLUTIONS

As for SO2 removal, calcium in the form of quicklime (CaO) or hydrated lime (Ca(OH)2) is the dominant chemistry used for control of SeO2 emissions. The choice of calcium sorbent depends on the type of capture process used.

Hg - MERCURY

Mercury is the only metal that is liquid at standard temperature and pressure conditions. It is highly toxic through ingestion or inhalation.

WHERE IT COMES FROM

Mercury is present in coal and is released by industrial processes, such as in coal power plants, waste-to-energy and cement plants.

PROPERTIES

Molecular formula

Hg

Molar mass

200.59 g/mol

Appearance

silvery

Odor

no odor

Hazards

toxic

Boiling point

357 °C     

LHOIST SOLUTIONS

In dry sorbent injection, mercury can be removed by physical adsorption onto the surface of suitable sorbents. These are typically carbon-based materials with very high surface areas. They include pulverized activated carbon, specialized surface-treated (or impregnated) activated carbon, activated lignite coke and blends. Lhoist offers a large range of blends with similar sorbents and selected components such as hydrated lime (Ca(OH)2) and mineral products tailored to meet the needs of any flue gas treatment installation. This offers a simple, flexible, economic and effective way for simultaneous removal of micropollutants such as mercury, and acidic gas components.

Our product range

PCDD & PCDF - DIOXINS & FURANS

This group of micropollutants is classified as polychlorinated dibenzo dioxins/furans. They consist of chlorinated biphenyl molecules linked with different oxygen bridges and are highly toxic.

Where they come from

Dioxins and furans are generated in flue gases when both chlorides and organic matter are present at relatively low temperatures.

LHOIST SOLUTIONS

In DSI processes dioxins/furans are removed by physical adsorption onto the surface of suitable sorbents. These are typically materials with very high surface areas, such as pulverized activated carbon, activated lignite coke or specialized minerals and blends. Lhoist offers a large range of blends with similar sorbents and selected components such as hydrated lime (Ca(OH)2) and mineral products tailored to meet the needs of any flue gas treatment installation. They offer a simple, flexible, economic and effective way for simultaneous removal of micropollutants such as dioxins/furans, and acidic gas components.

Our product range

Contact our FGT team for the best solution to capture your pollutants.

Discover the different injection possibilities for your process.

Processes